QUICKTRONIC INTELLIGENT DALI DIM T8

Product family features

Corridor function for direct connection of ECG to common motion sensor
Corridor function with pre-programmed light program
Touch DIM function for free parameterization of light value and turn on time
Fit for SMART GRID for feedback of consumed mains power and lamp operating hours
Fit for emergency function for automatic detection of emergency lighting by ECG
Very low standby power consumption: < 0.5 W
Lifetime: > 100,000 h (for T = 65 °C at T_c)
Very high number of switching cycles: up to 300,000
Dimming range: 1…100 % (3…100 % with compact fluorescent lamp)
POWER2LAMP function for optimal matching of ECG power to lamp during lamp lifetime
Line frequency: 0 Hz, 50…60 Hz, rectified AC

Product family benefits

System+ Guarantee available
Easy integration in luminaire thanks to same dimensions like DALI GI ECG
TouchDIM function for easy and inexpensive dimming of several ECGs
Same luminous flux with direct and alternating current
Dimming of amalgam lamps without flickering or reduced lifespan
Automatic restart after lamp replacement

DALI product features

Control via the DALI interface
Compliance with the DALI Version-1 and IEC 60929
Control input protected against overvoltage and polarity reversal (OSRAM ECG)

Touch DIM and Touch DIM Sensor function

Manual dimming without controller and with standard switches
Including memory function (double click) and soft start

Family data sheet

More downloads

Products

Sort by:
	Product	Width	Height	Dimmable	Dimming interface	Dimming range	Data sheet
	QTi DALI 2X18 DIM	30.0 mm	21.0 mm	Yes	DALI / Touch DIM / Touch DIM Sensor	1…100 %
	QTi DALI 3X18 DIM	40.0 mm	21.0 mm	Yes	DALI / Touch DIM / Touch DIM Sensor	1…100 %

Information about Family

If you need to install or modernize a lighting system with T8 lamps, the QUICKTRONIC INTELLIGENT DALI DIM T8 is an excellent option. It provides extensive DALI and TouchDIM functionalities, corridor function and a dimming range from 1 %...100 % (3 %...100 % with CFL). It is fit for SMART GRID, has a Fit for Emergency function and permits a very high number of switching cycles. Use QUICKTRONIC INTELLIGENT DALI DIM T8 with luminaires of protection class I for emergency lighting per EN 50172/DIN VDE 0108-100 and IEC 61347-2-3, appendix J, and for industrial lighting, office lighting, strip lighting, public buildings, factories, sports halls, corridors and storage rooms. This ECG’s many benefits include easy integration into luminaires, because it has the same dimensions as the DALI GI ECG, it also allows the dimming of amalgam lamps without harm or reduction in lamp life and provides automatic restart after lamp replacement.

Areas of application

Suitable for use in emergency lighting systems as per EN 50172/DIN VDE 0108-100
Installation in emergency lighting systems according to IEC 61347-2-3, appendix J
Industry
Open-plan offices, corridors and storage rooms
Public buildings
Sports halls and factories
Strip lighting
Suitable for luminaires of protection class I

References / Links
For more information on the system guarantee and the terms and conditions of the guarantee visit https://www.inventronics-light.com/multilevel-guarantees

Ecodesign regulation information:
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.