OT DX 165/220…240/1A0 DIMA LT2 E

Product family benefits
  • For Zhaga Book18 Luminaires and D4i certified incl. Parts 25x + AUX
  • Electrical interface and data communication fully based on open standards
  • Fully programmable via software (DALI Interface, NFC)
  • Low luminous efficacy tolerance through low output current tolerance of ± 3 %
  • High surge protection: up to 10 kV (1 pulse) in protection class I or II
  • Lifetime: up to 100,000 h (depending on Tc temperature, max. 10 % failure rate)
  • Mains input undervoltage protection
  • Very high efficiency
  • Fulfill safety requirement due to overload, overtemperature, Hot Plug protection
Areas of application
  • Street and urban lighting
  • Industry
  • Suitable for outdoor applications in luminaires with IP > 54
  • Suitable for use in outdoor luminaires of protection class I and II
German innovation awards 2019 winner osram-dam-13314687 DALI 2 Logo black and white

Technical Data

Electrical data

Nominal voltage

220…240 V

Input voltage AC

198…264 V

Permitted voltage range

Input voltage DC

176…276 V

Additional fuse needed in DC operation

Nominal current

0.78 A

Mains frequency

0/50/60 Hz

Additional fuse needed in DC operation

Power factor λ

0.77C...0.99

Full Load/Half Load at 230V 50Hz

Total harmonic distortion

< 10 %

Max. output power at 230 VAC

Device power loss

13 W

Maximum

Inrush current

77 A

At 180 µs

Max. ECG no. on circuit breaker 10 A (B)

5

Type B

Max. ECG no. on circuit breaker 16 A (B)

9

Type B

Max. ECG no. on circuit breaker 25 A (B)

14

Type B

Surge capability (L/N-Ground)

10 kV

Single pulse 10kV / 12 Ohm (1.2/50 μs)

Surge capability (L-N)

6 kV

@ 2 Ohm, acc. to EN61547

Nominal output power

165 W

Max. 75% in DC operating mode

Maximum output power

165 W

Efficiency in full-load

94 %

at 230 V, 50 Hz

Nominal output current

200…1050 mA

Default output current

700 mA

Output current tolerance

±3 %

+/- 5% for LEDset down to 300mA

Output ripple current (100 Hz)

10 %

Minimum output current

70 mA

Galvanic isolation

Double

Nominal input voltage (SD port)

220…240 V

with external component 'OT DX SD BOX' only

Output current LEDset open

70 mA

Auxiliary Power Supply

24 V

3W average, 6W peak power

Output current LEDset shorted

Not allowed

Nominal output voltage

130…260 V

U-OUT (working voltage)

300 V

Dimensions & weight

Length

170.0 mm

Width

100.0 mm

Height

40.0 mm

Mounting hole spacing, length

160.0 mm

Mounting hole spacing, width

90.0 mm

Product weight

1050.00 g

Cable cross-section, input side

0.2…1.5 mm²

Solid/ Flexible Leads

Cable cross-section, output side

0.2…1.5 mm²

Solid/ Flexible Leads

Wire preparation length, input side

8.5…9.5 mm

Temperatures & operating conditions

Ambient temperature range

-40…+55 °C

Temperature range at storage

-25…85 °C

Maximum temperature at tc test point

90 °C

Max.housing temperature in case of fault

120 °C

Permitted rel. humidity during operation

5…85 %

Non condensing, absolute humidity: 36g/m³

Lifespan

ECG lifetime

100000 h

At Tcase =78°C at Tc point / 10% failure rate

ECG ambient temperature (ta)

55 °C

45 °C

43 °C

Temperature at the measuring point tc (°C)

90 °C

80 °C

78 °C

ECG lifespan (h)

50000 h

85000 h

100000 h

Capabilities

Dimmable

Yes

Dimming interface

AstroDIM / DALI/DEXAL/D4i / StepDIM

StepDIM functionality with external component 'OT DX SD BOX' only

Dimming range

10…100 %

Suitable for fixtures with prot. class

I / II

Constant lumen function

Yes

NTC input

Yes

Short-circuit protection

Yes

No-load proof

Yes

Intended for no-load operation

No

Max. cable length to lamp/LED module

2.0 m

Output wires must be routed as close as possible to each other

DALI-2 Diagnostic Data

Yes

Acc. DALI part 253

DALI-2 Energy Data

Yes

Acc. DALI part 252

Overload protection

Yes

LEDset

Yes

Number of channels

1

Programming

Programming device

DALI / NFC

Tuner4TRONIC Field App

Yes

Tuner4TRONIC

Yes

Programmable features

Thermal Protection

Yes

Configuration Lock

Yes

DALI-2 Luminaire Data

Yes

Acc. DALI part 251

Emergency Mode

Yes

AstroDIM

Yes

Driver Guard

Yes

StepDIM

Yes

StepDIM functionality with external component 'OT DX SD BOX' only

Constant Lumen

Yes

Certificates & standards

Type of protection

IP20

Standards

Acc. to EN 61347-1/Acc. to EN 61347-2-13/Acc. to EN 62384/Acc. to EN 55015:2006 + A1:2007 + A2:2009/Acc. to EN 61547/Acc. to FCC 47 part 15 class B/Acc. to IEC 61000-3-2/Acc. to IEC 61000-3-3/Acc. to IEC 62386-101/Acc. to IEC 62386-102/Acc. to IEC 62386-207/Acc. to IEC 62386-150/Acc. to IEC 62386-250/Acc. to IEC 62386-251, -252, -253

Approval marks – approval

CE / ENEC / VDE / VDE-EMC / CCC / EL / DALI-2 / D4i / RCM

Logistical data

Commodity code

85044083900

Environmental information


Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)

Date of Declaration

03-11-2023

Primary Article Identifier

4052899999695

Candidate List Substance 1

Lead

CAS No. of substance 1

7439-92-1

Safe Use Instruction

The identification of the Candidate List substance is sufficient to allow safe use of the article.

Declaration No. in SCIP database

a94e5118-1deb-440e-ae82-f1b5c4081970

Packaging information

EAN

Unit

Piece

Dimension l x w x h

Weight

Volume

4052899999695 UNV

Unpacked

1 1050.00g
4052899999732 VS

Shipping box

10 303mm x 285mm x 205mm 11224.00g 17.70dm³

Downloads

Accessories optional

Information about Family

The future-proof way towards a smart city

The electrical interface and data communication of this driver is fully based on open standards. It shows a DEXAl interface with the DiiA standard -250 and is also ready for Zhaga Book 18 and DALI part 25x + AUX. The device is fully programmable via DALI interface and NFC.
Product family features
  • DEXAL interface based on DALI-2 communication
  • Available with different wattage: 40 W, 75 W, 110 W, 165 W
  • Current output range: 70…1,050 mA
  • AstroDIM for autonomous dimming with five independent levels (astro, time mode)
  • Standby power consumption: < 0.5 W
  • Integrated customizable thermal management (Driver Guard)
  • Constant Lumen Output (CLO)
Ecodesign regulation information:
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.

Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.

Products

Sort by:
Product
Nominal output current
Length
Width
Height
Data sheet
OT DX 40/220…240/1A0 DIMA LT2 E
200…1050 mA 133.0 mm 77.0 mm 40.0 mm
OT DX 75/220…240/1A0 DIMA LT2 E
200…1050 mA 150.0 mm 90.0 mm 40.0 mm
OT DX 110/220…240/1A0 DIMA LT2 E
200…1050 mA 170.0 mm 100.0 mm 40.0 mm
OT DX 165/220…240/1A0 DIMA LT2 E
200…1050 mA 170.0 mm 100.0 mm 40.0 mm