OPTOTRONIC FIT CS Track

Product family features
  • Supply voltage: 220…240 V
  • Line frequency: 50 Hz | 60 Hz
  • Line voltage: 198…264 V
  • Lifetime: up to 50,000 h (temperature at Tc = 75 °C, max. 10 % failure rate)
Product family benefits
  • High quality of light thanks to low output ripple current
  • High flexibility due to four different output currents per type
  • Short housing for minimum distance between spotlights
  • SELV system

Products

Sort by:
Product
Nominal output voltage
Nominal output current
Length
Width
Height
Data sheet
OT FIT 20/220-240/500 CS T-B
25…42 V 250 / 350 / 450 / 500 mA 162.0 mm 32.0 mm 41 mm
OT FIT 20/220-240/500 CS T-G
25…42 V 250 / 350 / 450 / 500 mA 162.0 mm 32.0 mm 41 mm
OT FIT 20/220-240/500 CS T-W
25…42 V 250 / 350 / 450 / 500 mA 162.0 mm 32.0 mm 41 mm
OT FIT 30/220-240/800 CS T-B
25…42 V 600 / 700 / 750 / 800 mA 162.0 mm 32.0 mm 41 mm
OT FIT 30/220-240/800 CS T-G
25…42 V 600 / 700 / 750 / 800 mA 162.0 mm 32.0 mm 41 mm
OT FIT 30/220-240/800 CS T-W
25…42 V 600 / 700 / 750 / 800 mA 162.0 mm 32.0 mm 41 mm
OT FIT 40/220-240/1A0 CS T-B
27…42 V 850 / 900 / 950 / 1050 mA 162.0 mm 32.0 mm 41 mm
OT FIT 40/220-240/1A0 CS T-G
27…42 V 850 / 900 / 950 / 1050 mA 162.0 mm 32.0 mm 41 mm
OT FIT 40/220-240/1A0 CS T-W
27…42 V 850 / 900 / 950 / 1050 mA 162.0 mm 32.0 mm 41 mm

Information about Family

Ultimate miniaturization and high flexibilty for track systems.

This Compact LED driver has the shortest possible housing at this wattage that allows a lot of flexibility at positioning spot lights on track systems. The wide operating window with 4 currents, that can easily be selected via DIP-Switches, allows flexibility in choosing compatible LED modules.
Areas of application
  • Track lights
  • Shops and hospitality: retail, hotels, restaurants
Ecodesign regulation information:
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.

Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.

Downloads