LF500-G1-840-10 L2
.jpg)
.jpg)
Product family benefits
- Color consistency up to 2 SDCM on entire light strip thanks to Single-bin technology
- Color rendering options Ra: 80 and 90
- Service lifetime (L80/B10): up to 60,000 h
- LM79 and LM80 compliant
- Embedded constant current regulators
- No solder-joints on circuit board
- Flexible and cuttable LED strips
- Dimmable (with suitable PWM dimming methods)
Areas of application
- For high-end application with dedicated equipment and accessories
Equipment / Accessories
- Flexessories: a complete set of aluminum channels with diffusers and lenses
- Connectors: quick-and-easy toolless installation with SLIMCONNECTsystem G2
- Drivers and dimmers: wide selection of OPTOTRONIC 24 V DALI, DMX and BLE
- Check for more detailed information the specification sheets in the download section
Technical Data
Electrical data
Nominal voltage
24.0 V
Type of current
DC
Nominal wattage per meter
3.9 W
Rated wattage
39.00 W
Input voltage range
23…25 V
Accidental reverse input voltage protection up to
25 V
Photometrical data
Color rendering index Ra
>80
Luminous flux per meter
520 lm
Total useful luminous flux
5200 lm
Luminous efficacy
133 lm/W
Standard deviation of color matching
≤3 sdcm
Light color (designation)
4000 K
Rated color temperature
4000 K
Color temperature
4000 K
Light technical data
LED pitch
14.29 mm
Beam angle
120 °
Starting time
< 0.5 s
Warm-up time (60 %)
< 0.50 s
LED module information
Number of LEDs per meter
70
Number of LEDs per smallest unit
7
Dimensions & weight
Length
10000 mm
Length – smallest unit
100.0 mm
Product weight
86.40 g
Height
1.40 mm
Width
8.00 mm
Cable cross-section, input side
0.51 mm²
Temperatures & operating conditions
Performance temp. acc. to IEC 62717
35 °C
Temperature range in operation at Tc point
-30…75 °C
Ambient temperature range
-30…+50 °C
Temperature range at storage
-40…+85 °C
Lifespan
Rated lamp life time
60000 h
Nominal lamp life time
60000 h
Lumen main.fact.at end of nom.life time
0.70
Number of switching cycles
› 15000
Additional product data
Predecessor EAN
4052899575233
ID of contained light source
LS_TRV_274089
Capabilities
Lowest bending radius
20 mm
Self-adhesive
Yes
With connection set
No
With end piece
No
Certificates & standards
Energy consumption
43 kWh/1000h
Standards
CE/UL/ENEC/EAC
Type of protection
IP20
Energy efficiency class of the contained light source
E
Logistical data
Commodity code
85395100000
Environmental information
Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)
Date of Declaration
07-07-2023
Primary Article Identifier
4062172142373
Candidate List Substance 1
Lead
CAS No. of substance 1
7439-92-1
Safe Use Instruction
The identification of the Candidate List substance is sufficient to allow safe use of the article.
Declaration No. in SCIP database
0e759a3b-d142-4785-a773-00aee3c6f638
Packaging information
EAN |
Unit |
Piece |
Dimension l x w x h |
Weight |
Volume |
|---|---|---|---|---|---|
| 4062172142373 |
FS
| 1 | 186mm x 190mm x 29mm | 179.00g | 1.02dm³ |
| 4062172142380 |
VS
| 8 | 241mm x 195mm x 205mm | 1624.00g | 9.63dm³ |
Downloads
Data sheets
Accessories optional
Information about Family
Ecodesign regulation information:
- This product is considered to be a "containing product" in the sense of Regulations (EU) 2019/2020 and (EU) 2019/2015.
- Tolerances of the reported values, are according to LED Modules Performance standard IEC/EN 62717.
- In general, the replacement of the contained light sources without permanent damage to the product with the use of common available tools is possible in the final application when they can be dismantled from the installation environment and substituted for the necessary number of light sources restoring its full electrical/mechanical/thermal/optical functionality by means of a professional installer.
In the contrary, and limited to the LINEARlight Flex Diffuse, LINEARlight Rigid Finesse, GINO LED Flex Diffuse and LUMINENT Milky product families, the contained light source is an integrated part of the containing product and its removal can only be done by causing a permanent damage to the containing product due to its tight mechanical, electrical, optical, thermal interaction and/or environmental protection with or from the containing product. Therefore, a replacement of the light source with the use of common available tools is not justified. - Dismantling of light sources from containing products at end of life: Containing products with light sources which are scalable in length can be cut to the length of the contained light source and if applicable mechanically detached from protective and/or optical covers. Containing products shall be separated from building material and/or from other additional mounting accessories by means of a professional installer.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Products
| Product |
|
|
Data sheet | ||
|---|---|---|---|---|---|
|
|
LF500-G1-925-10 L2
|
≥90 | 400 lm | ||
|
|
LF500-G1-927-10 L2
|
≥90 | 400 lm | ||
|
|
LF500-G1-930-10 L2
|
≥90 | 400 lm | ||
|
|
LF500-G1-940-10 L2
|
≥90 | 440 lm | ||
|
|
LF500-G1-840-10 L2
|
>80 | 520 lm |